The main premise behind the 2" lap belt is one of added safety. A 2" belt rides within the crest of the human pelvis where a 3" belt would rest on the edges. This allows you to get the belt up to an inch and a half tighter. That means the lap belt will be working earlier in the accident event because it gets loaded faster. It's also more comfortable and easier to adjust because there's less friction through the adjuster.

Another feature unique to the Profi Series 2" lap belts is the "Flexi Belt". The End Fittings and Cam Latches are wrapped into the harness, making it so that the lap belt can be changed from a Pull Up configuration to a Pull Down. This allows you to set the belt up just the way you want it for your specific situation. It also allows for Bolt In brackets to be wrapped in for the lap belts if needed. Snap in brackets come standard on the laps.

Comes with Snap-In attachments at Lap and Sub points. The Shoulders come ready to be wrapped around a stock Boxster or aftermarket roll-bar. Snap or Bolt attachments can be purchased separately. Available in Black, Blue, Red & Silver.

Eyebolt screws into existing threaded outboard hole - holes will need to be drilled in floorboard for anti-subs and inboard lap belt. Contact Todd for assistance in installation - if he could do it, you certainly can too!